SS832 ABB Power module

1、 Basic Information
Brand: ABB
Model: SS832
Type: Power module/power control unit
Application areas: Industrial automation, control systems, etc
2、 Functional characteristics
Redundant power supply configuration:
SS832 may support redundant power configuration, which means it can receive inputs from two or more power units and automatically switch to another power unit when one power unit fails to ensure continuous power supply to the system. This design improves the reliability and stability of the system.
Monitoring and protection functions:
This module may have the function of monitoring power supply voltage, current, and other key parameters to ensure the stability and reliability of the power supply. In addition, it may also provide protection functions such as overcurrent, overvoltage, and overtemperature to prevent damage to the power unit or system failure.
Easy to install and integrate:
SS832 may adopt a standard DIN rail installation method, making it easy to install into control cabinets or equipment. Meanwhile, it may provide multiple interfaces and communication protocols for integration with other control systems and devices.
Wide range input voltage:
In order to adapt to different industrial applications and environmental conditions, SS832 may support a wide range of input voltages to ensure stability and reliability under different power supply conditions.
High performance and reliability:
As a product of ABB, SS832 usually has high performance and reliability, and can operate stably for a long time in harsh industrial environments.
3、 Application Fields
The application areas of SS832 are very extensive, including but not limited to the following aspects:

Water treatment:
SS832 can be used for power supply of water treatment equipment to ensure its normal operation.
Building control:
In the air conditioning, lighting and other equipment of large buildings, SS832 can be used as a backup power source to ensure that the equipment can still work normally in case of power outages or main power failures.
Data Center:
In the UPS (uninterruptible power supply) system of the data center, SS832 can serve as a backup power source to ensure uninterrupted power supply to the data center.
Renewable energy:
In renewable energy generation equipment such as solar and wind power, SS832 can serve as a backup power source to ensure that the equipment can continue to supply power in the event of grid failure.
Factory automation:
In the production lines of various factories, SS832 can serve as a backup power source to ensure that equipment can still function normally in the event of power outages or main power failures.
Material handling:
SS832 can also serve as a backup power source in various material processing equipment, ensuring that the equipment can still operate normally in the event of power outages or main power failures.
a ship:
SS832 can serve as a backup power source in the power systems of various types of ships, ensuring that the ship’s power supply will not be interrupted.
Other industries:
In addition to the above-mentioned fields, SS832 can also be applied to other industries and applications, such as transportation, health equipment, security equipment, etc.

Recently, ABB Group, headquartered in Switzerland, has attracted industry attention for a technology called “Flash Charging”. According to the information obtained from ABB (China) Enterprise Communication Department, “This technology was designed to be promoted globally

The system has been operating on the route between Geneva Airport and Palexpo Exhibition Center since May 26th and will continue until March 14th, 2014. The head of the company stated that this technology is suitable for ordinary cities, large cities, and mega cities seeking sustainable public transportation solutions. Used for high-frequency bus routes to alleviate traffic congestion in urban areas

According to ABB, this technology is equipped with a water-cooled lithium titanate oxide LTO battery pack with a service life of 10 years. There is a rooftop charging system at the station that can charge for 15 seconds at a power of 400 kilowatts. These charging systems are connected to the power grid and equipped with intermediate storage devices (supercapacitors) to reduce the impact of short-term high power on the grid. The fast charging point can charge buses up to 1.65 kWh. In addition, at the bus terminal, there is a 200 kW charger that can fully charge the battery in 3-4 minutes.

At present, pure electric buses using this technology can carry 135 people. When the vehicle stops at the station, it is located by infrared, and the charging point on the roof is connected to the moving arm controlled by laser after positioning. After completing a 15 second recharge, the vehicle continues to move forward without affecting the normal operation of the bus. Its concept is similar to that of a tram, but it does not require the installation of a complex network.

In addition to ABB, similar concepts of fast charging during driving are also being promoted by many companies in China. During an interview with reporters, Wang Binggang, the leader of the supervision and consulting expert group for the National 863 Program’s major projects on energy conservation and new energy vehicles, referred to this mode as “online charging” The online charging mode can effectively solve the contradiction between battery quantity and range Wang Binggang stated. It is reported that currently, bus companies such as Hunan CSR Times Electric Vehicle, Youth Bus, and Hengtong Electric Vehicle are developing and promoting similar technologies.

As a Fortune 500 company, ABB’s business scope includes power and automation technology. In the field of electric vehicles in China, ABB is a supplier of DC drives, motors, programmable controller products, electric vehicle charging infrastructure, and energy storage products. In the field of charging infrastructure, ABB has not had a good opportunity, perhaps the latest “flash charging technology” can find some market space for ABB.

Xiamen Xiongba E-commerce Co., Ltd. is a spare parts service provider in the field of industrial automation. Our main products include PLC modules, DCS cards, ESD system cards, vibration monitoring system cards, turbine control system modules, and gas generator spare parts. We have established close cooperative relationships with multiple PLC and DCS product maintenance service providers. The company operates in an e-commerce model, reduces intermediate links, and provides consumers with high-quality products and satisfactory services in a timely manner. The company has a complete logistics supply system and has established good cooperative relationships with many well-known foreign brand manufacturers. Our company can directly purchase goods from overseas, provide equipment and spare parts from different countries and manufacturers, and solve your troubles or concerns about product quality in multiple places. We have a great advantage in terms of price and detailed product information. We sincerely welcome you to call or use email to inquire! The company’s distributed products are widely used in industries such as CNC mechanical metallurgy, oil and gas, petrochemicals, chemical engineering, paper and printing, textile printing and dyeing, machinery, electronics manufacturing, automobile manufacturing, tobacco, plastic machinery, electricity, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, and power transmission and distribution.