SNAT603CNT 61007041 ABB Multifunctional module

1、 Product Overview
Brand and Model: ABB, SNAT603CNT 61007041
Type: Multi functional module/control board
Application areas: Industrial automation, DCS systems, motor control, etc
2、 Product Features
Excitation system control:
SNAT603CNT 61007041, as the central control system control board of the excitation system, can provide necessary excitation current to the rotor winding of the synchronous motor.
The excitation system generates magnetic flux through the current in the magnetic field winding, and the main requirements for the excitation system include reliability under all operating conditions, simple control, easy maintenance, stability, and fast transient response.
The required excitation depends on the load current, load power factor, and machine speed. When the load current is high, the system requires more excitation, and when the speed is low, the power factor of the system becomes lagging.
Fuel Efficiency Solution:
SNAT603CNT 61007041 also offers a range of solutions to improve fuel efficiency and reduce emissions.
By precisely controlling the air/fuel ratio, the efficiency of the burner can be improved.
Continuously monitor the thermal process to diagnose problems and optimize performance, while service technicians continuously adjust the combustion system for better operation.
Variable frequency regulation function:
This module may also have frequency conversion regulation function, which controls the speed and torque of single-phase and three-phase induction motors by changing the input frequency and voltage, thereby improving the performance, management, and energy efficiency of the system.
3、 Technical parameters (partial)
Voltage: 24V
Current: 100-400A
Weight: 2KG

Recently, ABB Group, headquartered in Switzerland, has attracted industry attention for a technology called “Flash Charging”. According to the information obtained from ABB (China) Enterprise Communication Department, “This technology was designed to be promoted globally

The system has been operating on the route between Geneva Airport and Palexpo Exhibition Center since May 26th and will continue until March 14th, 2014. The head of the company stated that this technology is suitable for ordinary cities, large cities, and mega cities seeking sustainable public transportation solutions. Used for high-frequency bus routes to alleviate traffic congestion in urban areas

According to ABB, this technology is equipped with a water-cooled lithium titanate oxide LTO battery pack with a service life of 10 years. There is a rooftop charging system at the station that can charge for 15 seconds at a power of 400 kilowatts. These charging systems are connected to the power grid and equipped with intermediate storage devices (supercapacitors) to reduce the impact of short-term high power on the grid. The fast charging point can charge buses up to 1.65 kWh. In addition, at the bus terminal, there is a 200 kW charger that can fully charge the battery in 3-4 minutes.

At present, pure electric buses using this technology can carry 135 people. When the vehicle stops at the station, it is located by infrared, and the charging point on the roof is connected to the moving arm controlled by laser after positioning. After completing a 15 second recharge, the vehicle continues to move forward without affecting the normal operation of the bus. Its concept is similar to that of a tram, but it does not require the installation of a complex network.

In addition to ABB, similar concepts of fast charging during driving are also being promoted by many companies in China. During an interview with reporters, Wang Binggang, the leader of the supervision and consulting expert group for the National 863 Program’s major projects on energy conservation and new energy vehicles, referred to this mode as “online charging” The online charging mode can effectively solve the contradiction between battery quantity and range Wang Binggang stated. It is reported that currently, bus companies such as Hunan CSR Times Electric Vehicle, Youth Bus, and Hengtong Electric Vehicle are developing and promoting similar technologies.

As a Fortune 500 company, ABB’s business scope includes power and automation technology. In the field of electric vehicles in China, ABB is a supplier of DC drives, motors, programmable controller products, electric vehicle charging infrastructure, and energy storage products. In the field of charging infrastructure, ABB has not had a good opportunity, perhaps the latest “flash charging technology” can find some market space for ABB.

Xiamen Xiongba E-commerce Co., Ltd. is a spare parts service provider in the field of industrial automation. Our main products include PLC modules, DCS cards, ESD system cards, vibration monitoring system cards, turbine control system modules, and gas generator spare parts. We have established close cooperative relationships with multiple PLC and DCS product maintenance service providers. The company operates in an e-commerce model, reduces intermediate links, and provides consumers with high-quality products and satisfactory services in a timely manner. The company has a complete logistics supply system and has established good cooperative relationships with many well-known foreign brand manufacturers. Our company can directly purchase goods from overseas, provide equipment and spare parts from different countries and manufacturers, and solve your troubles or concerns about product quality in multiple places. We have a great advantage in terms of price and detailed product information. We sincerely welcome you to call or use email to inquire! The company’s distributed products are widely used in industries such as CNC mechanical metallurgy, oil and gas, petrochemicals, chemical engineering, paper and printing, textile printing and dyeing, machinery, electronics manufacturing, automobile manufacturing, tobacco, plastic machinery, electricity, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, and power transmission and distribution.